edge to edge design

This machine embroidery design allows you to use your embroidery machine to endlessly quilt your item.
Files supported: DST, EXP, HUS, JEF, PES, VIP, VP3, XXX
This design includes 7 rectangular designs to fit within these hoops: 5×7, 6×10, 7×12, 8×12, 9×14, 10.5×16, 11.5×18.
This design is a single running stitch in a continuous line. See photos for design sizes and stitch count.

Frame size and design size follows.
5 X 7: 4.5″W X 6.5″H
6 X 10: 5.5″W X 9.5″H
7 X 12: 6.5″W X 11.5″H
8 X 12: 7.5″W X 11.5″H
9 X 14: 8.5″W X 13.5″H
10 X 16: 10″W X 15.5″H
11.5 X 18: 11″W X 17.75″H

Since this is a machine embroidery designs, there is a tie in at the beginning and a tie off at the end of the design. This prevents the stitching from unraveling. In order to prevent a knot at the beginning of the design, there are two (2) options to prevent this:
1. Some machine have a setting that allows you to turn off the ties.
2. Advance the design to the first stitch, then drop the needle down one stitch and then bring it back up all while holding the top thread. Then pull the bobbin thread up to the top. You will then be able to take a hand needle and bury these stitches into the quilt.

Recommended supplies:
1. Regular polyester embroidery thread. For the bobbin, I wind the same weight thread as the top thread. I love Exquisite thread
2. Snap Hoop Monster makes hooping very easy: Snap Hoop Monster Magnetic Hoop
3. OESD Print and Stitch Target Paper: Print & Stick Target Paper
4. Weightless Quilter Tabletop
5. Weightless Quilter Floor 
6. My Quilt Planner Software 
7. Embrilliance Software allows you to open these files to print your template.

By purchasing this design you agree to our TERMS OF USE  

https://youtu.be/SViXK-H8YlY?t=18779

This machine embroidery design allows you to use your embroidery machine to endlessly quilt your item.
Files supported: DST, EXP, HUS, JEF, PES, VIP, VP3, XXX
This design includes 7 rectangular designs to fit within these hoops: 5×7, 6×10, 7×12, 8×12, 9×14, 10.5×16, 11.5×18.
This design is a single running stitch in a continuous line. See photos for design sizes and stitch count.

Frame size and design size follows.
5 X 7: 4.5″W X 6.5″H
6 X 10: 5.5″W X 9.5″H
7 X 12: 6.5″W X 11.5″H
8 X 12: 7.5″W X 11.5″H
9 X 14: 8.5″W X 13.5″H
10 X 16: 10″W X 15.5″H
11.5 X 18: 11″W X 17.75″H

Since this is a machine embroidery designs, there is a tie in at the beginning and a tie off at the end of the design. This prevents the stitching from unraveling. In order to prevent a knot at the beginning of the design, there are two (2) options to prevent this:
1. Some machine have a setting that allows you to turn off the ties.
2. Advance the design to the first stitch, then drop the needle down one stitch and then bring it back up all while holding the top thread. Then pull the bobbin thread up to the top. You will then be able to take a hand needle and bury these stitches into the quilt.

Recommended supplies:
1. Regular polyester embroidery thread. For the bobbin, I wind the same weight thread as the top thread. I love Exquisite thread
2. Snap Hoop Monster makes hooping very easy: Snap Hoop Monster Magnetic Hoop
3. OESD Print and Stitch Target Paper: Print & Stick Target Paper
4. Weightless Quilter Tabletop
5. Weightless Quilter Floor 
6. My Quilt Planner Software 
7. Embrilliance Software allows you to open these files to print your template.

https://youtu.be/SViXK-H8YlY?t=18779

PLEASE READ OUR TERMS OF USE REGARDING THE USE OF THIS DESIGN AND OUR PHOTO USE POLICY.

By purchasing this design you agree to our TERMS OF USE

This machine embroidery design allows you to use your embroidery machine to endlessly quilt your item.
Files supported: DST, EXP, HUS, JEF, PES, VIP, VP3, XXX
This design includes 7 rectangular designs to fit within these hoops: 5×7, 6×10, 7×12, 8×12, 9×14, 10.5×16, 11.5×18.
This design is a single running stitch in a continuous line. See photos for design sizes and stitch count.

Frame size and design size follows.
5 X 7: 4.5″W X 6.5″H
6 X 10: 5.5″W X 9.5″H
7 X 12: 6.5″W X 11.5″H
8 X 12: 7.5″W X 11.5″H
9 X 14: 8.5″W X 13.5″H
10 X 16: 10″W X 15.5″H
11.5 X 18: 11″W X 17.75″H

Since this is a machine embroidery designs, there is a tie in at the beginning and a tie off at the end of the design. This prevents the stitching from unraveling. In order to prevent a knot at the beginning of the design, there are two (2) options to prevent this:
1. Some machine have a setting that allows you to turn off the ties.
2. Advance the design to the first stitch, then drop the needle down one stitch and then bring it back up all while holding the top thread. Then pull the bobbin thread up to the top. You will then be able to take a hand needle and bury these stitches into the quilt.

Recommended supplies:
1. Regular polyester embroidery thread. For the bobbin, I wind the same weight thread as the top thread. I love Exquisite thread
2. Snap Hoop Monster makes hooping very easy: Snap Hoop Monster Magnetic Hoop
3. OESD Print and Stitch Target Paper: Print & Stick Target Paper
4. Weightless Quilter Tabletop
5. Weightless Quilter Floor 
6. My Quilt Planner Software 
7. Embrilliance Software allows you to open these files to print your template.

https://youtu.be/SViXK-H8YlY?t=18779

PLEASE READ OUR TERMS OF USE REGARDING THE USE OF THIS DESIGN AND OUR PHOTO USE POLICY.

By purchasing this design you agree to our TERMS OF USE